A press brake is a machine designed to form folds and bends in sheet metal. The bends are formed to a predetermined angle and are created by clamping the sheet between a combination punch and die. The punch is then forced down into the die, and the sheet of metal bends accordingly.
Press brakes are available in different types, usually described by the nature of the force used to form the bends. There are mechanical, hydraulic, pneumatic and servo-electric types of press brakes. There are also manually operated hand press brakes. These tend to be smaller machines where high pressure forces for metal bending are not necessary.
Safan Press Brake Manual
The maximum pressures in a press brake can usually be measured in hundreds of tons. Hydraulic press brakes are the most popular type today, but up until 50 or 60 years ago it was mechanical press brakes that dominated.
The old style, hard to adjust and guard, mechanical press brake uses an electric-powered flywheel to build up the tonnage pressure for sheet metal forming. The flywheel is linked to the moving part of the press brake, the ram, which can be engaged and disengaged as required. The disengaged flywheel will build up inertia that can be utilised to cause the ram to move up and down when re-engaged.
The hydro-mechanical press brake is broadly similar to the mechanical version. Instead of having a flywheel, it is powered by a hydraulic motor that turns an eccentric shaft, which in turn causes the ram to move up and down.
The hydraulic press brake, unlike all the other types of press brake, which are down-acting only, can be either up-acting or down-acting. It employs a hydraulic pump that move the ram through the action of hydraulic cylinders. Servo-electric and pneumatic press brakes are usually light tonnage machines.
At Webster Machinery, we sell all types of press brake, the older designs as used machines and the Servo option in both new and used. Our new press brakes are produced by SafanDarley, based in the Netherlands. Our used press brakes selection is constantly changing but typically includes machines from all the major manufacturers. These include Adira, Amada, Beyeler, Bystronic, Bronx, Cincinatti, Darley, Edwards Pearson, Guifil, Haco, KB, LVD, Mebusa, Megaform, Promecam, Pullmax, Safan, and Trumpf. 2ff7e9595c
Comments